Skip to content

What Factors Will Affect the Working Efficiency of the Organic Fertilizer Equipment Pulverizer?

What Factors Will Affect the Working Efficiency of the Organic Fertilizer Equipment Pulverizer?

In recent years, with the continuous development of the agricultural field, the market demand for organic fertilizers is increasing. The organic fertilizer pulverizer is an important part of the organic fertilizer production line, so what factors will affect the working efficiency of the organic fertilizer equipment pulverizer? The following FPC organic fertilizer equipment pulverizer manufacturers will take you to find out.

One, material selection is very important. When selecting materials, pay attention to the hardness of the material. The harder the material, the more difficult it is to crush, and the damage to the organic fertilizer equipment will be more serious. If the crushing speed becomes slower, the natural crushing ability will be reduced.

Second, the humidity of the material is also a key factor, because when the water content in the material is relatively large, the material is prone to sticking inside the pulverizer, and it is also prone to blockage during the feeding and conveying process. The functions of the organic fertilizer pulverizer will also be affected. Therefore, before the material is crushed, it is necessary to find a way to reduce the moisture content of the material, so that the organic fertilizer equipment crusher can work better.

Third, the crushing fineness of the crushed material is relatively high, that is to say, the finer the crushed material, the smaller the crushing ability.

Fourth, the crushing parts of the fertilizer crushing equipment: the better the wear resistance of the hammer head and the jaw plate, the stronger the crushing ability. Check the wear degree of broken parts and replace them in time.

Fifth, the composition of the pulverized material, the more fine powder contained in the material before pulverization, the more difficult it is to pulverize, because those fine powders are prone to adhesion and affect the speed of conveying. Before crushing, if the content of fine powder of the material is relatively large, it should be sieved once in advance. The higher the viscosity of the material, the more likely it is to stick.

The above are some factors that affect the working efficiency of the organic fertilizer crusher. You can refer to it and adjust the influence conditions of the organic fertilizer material and the machine in advance, which can effectively improve the working efficiency of the equipment and ensure the normal operation of the production line.

Leave a Reply

Your email address will not be published. Required fields are marked *