Daily Troubleshooting Rules for Organic Fertilizer Equipment
Organic fertilizer equipment is simple and practical, and the fertilizer produced can be quickly absorbed by crops. In order to better use the organic fertilizer equipment, it is very important to maintain the organic fertilizer equipment. Below we will focus on the maintenance of organic fertilizer equipment.
- The shaft in the organic fertilizer equipment bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life.
- Lubricating oil directly affects the service life and operation rate of the organic fertilizer equipment, so the injected lubricating oil must be clean and the seal must be good. The main oil injection part of the machine is the rotating bearing, the roller bearing, all the gear movable bearings and sliding planes.
- The newly installed wheel tyres are prone to loosening and must be checked frequently.
- For organic fertilizer equipment, attention should be paid to whether all parts of the machine are working properly.
- Pay attention to check the degree of wear of the easy-wear parts of the organic fertilizer manufacturing machine equipment, and pay attention to replace the worn parts at any time.
- The bottom frame of the movable device of the organic fertilizer equipment should be cleaned of dust and other debris to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.
- If the rotating gear in the organic fertilizer equipment is running, if there is an impact sound, it should be stopped immediately for inspection and eliminated.
- The problem of unsatisfactory drying effect in organic fertilizer equipment. The drying effect of the organic fertilizer dryer is not good when it can meet the output. Most of the internal structure is unreasonable, or the length of the cylinder is not enough. Although these are not major problems, they affect the interests of users to a very high degree. The solution is to reasonably adjust the internal lifting plate and the length according to the material demand. The lifting plate plays a role of spreading the material to increase the contact area with the hot air, and the increase of the length of the cylinder lengthens the drying time.
It can be seen from the above that the common causes of abrasion of organic fertilizer equipment are nothing more than four points, and it is very important to make corresponding and reasonable maintenance for these four points. FPC organic fertilizer making equipment manufacturers usually make detailed descriptions and solutions for the wear and tear of each equipment component and common fault treatment in the manual of each organic fertilizer equipment. On the other hand, routine maintenance is more important, and compliant routine maintenance can effectively reduce failures and prolong life. At the same time, equipment manufacturers will continue to provide customers with technical support services, consulting anytime, anywhere, and can get satisfactory answers.