How to Deal With the Common Faults of Organic Fertilizer Equipment?
There will be various problems in the use of organic fertilizer equipment. These problems are actually normal. After a period of time, organic fertilizer will inevitably fail. This kind of failure is directly proportional to organic fertilizer equipment service life and the maintenance effect. When we encounter problems, we must solve them in time so that we can not affect our work. Then how do we need to solve the common problems of organic fertilizer?
Let’s first take the example of how we should do when the motor is overheated and the noise is abnormal during the use of the organic fertilizer equipment. Generally, when this kind of problem occurs, we need to look at the following points first:
- Whether the bearing is poorly lubricated or worn seriously.
- The switch circuit is in poor contact, or the wire is disconnected and runs a single phase.
- Whether the voltage is too low. If the granulator machinery makes abnormal sound during operation, the cylinder is stuck by obstacles, and even the cylinder cannot be rotated and the bottom box vibrates.
The cause of the above phenomenon is often stuck by the object in the bottom box, and then the granulated material falls off, causing the cylinder to rattle, and in severe cases, the cylinder skin will be scratched. At this time, stop for maintenance and troubleshoot. The reducer of some granulation machines is overheated, and the reason is insufficient oil or poor oil quality; gears and worms are worn too much, or the meshing is not good. The bearing is poorly lubricated or severely worn. If the magnetic field strength of the granulator becomes weaker, the reason for this situation is generally that the temperature is too high, the body is exposed to sunlight and acid-base corrosion.
The above are the reasons for some common failures and quick removal methods when users use the granulator. When the organic fertilizer equipment fails, you must not panic, find the problem first, so that it is easy to maintain, and we should also pay more attention to maintenance. Only in this way can the service life of the organic fertilizer equipment be extended.